QNAP QDA-A2AR diskový adaptér 2x 2,5" SATA do 3,5" SATA
Popis a parametry
QNAP QDA-A2AR diskový adaptér 2x 2,5" SATA do 3,5" SATA
QNAP QDA-A2AR
Použijte dva 2,5” SATA disky v jedné 3,5” pozici pro diskové jednotky SATA s podporou RAID pro počítače a NAS
Model QDA-A2AR může pojmout dva 2,5” SATA disky do jedné 3,5” pozice pro diskové jednotky SATA. Pro QDA-A2AR není nutný žádný softwarový ovladač a lze jej nainstalovat do počítače/pracovní stanice (Windows®, Linux®) nebo QNAP NAS, aby bylo možné flexibilně přidávat další pevné disky nebo SSD s ohledem na různé úložné potřeby.
Stránky produktu:https://www.qnap.com/cs-cz/product/qda-a2ar
| Standard Warranty | 1 rok |
| Supported Drives | 2 x 2,5” SATA HDD/SSD 6 Gb/s (výška až 9,5 mm) |
| Hostitelské rozhraní | SATA 6 Gb/s |
| Podporované operační systémy | 1. QTS 4.4.1 (or later) 2. Windows: Windows 7, 8.1, 10, Windows Server 2012 R2 3. Ubuntu |
| Dimensions (L x W x H) | 138,2 × 101,6 × 25,9 mm |
| Hmotnost | 0.15 kg |
| Podpora RAID | RAID 0, 1 |
| Poznámka | The connected drive may not reach its optimal performance due to protocol translation and some overhead. All the drive data will be cleared upon drive initialization or RAID mode switching with the QDA-A2AR. Ensure that all data is backed up beforehand. Window and Linux PC supports all four modes mentioned above. QTS does not support Individual mode. It is recommended that only drives with identical model numbers and capacities are used to create a RAID 0/1 group because the total storage space will be equal to the size of the smallest drive. The SATA controller of the PC must support port multipliers to recognize two drives in the Individual mode configuration. Consult your system provider and install the latest drivers for your SATA controller. Installing a QNAP disk adapter in another QNAP disk adapter is not supported. (e.g. QDA-A2MAR cannot be installed in the QDA-A2AR.) TR-002/TR-004 RAID expansion enclosures do not support QDA-A2AR/QDA-A2MAR. QTS identifies the drives in a QDA-A2AR as a single volume. Installing two drives with a RAID 1 configuration for QDA-A2AR is required to use Qtier. If a QDA-A2AR drive fails and needs replaced: you must disable Qtier to make the QDA-A2AR drive data move to the NAS-based storage pool, and then replace the failed QDA-A2AR drive. |
QNAP QDA-A2AR diskový adaptér 2x 2,5" SATA do 3,5" SATA
Naposledy navštívené
